Drum Production, Bitumen Packing & Export of Bitumen

The Feedar Group is an international business group of manufacturing and trading companies whichhave been active in the markets all over the world for about two decades with offices in the Middle East. 

Located near the ancient city of Isfahan in Iran, Feedar Esfahan Manufacturing Co., produces new steel drums and packs bitumen for export.  With a fine reputation as one of the leading exporters of drummed bitumen, Feedar Esfahan Manufacturing Co., is obligated to provide the best services to its customers. 

The bitumen is sourced from the major refineries which are most reputable for their quality. 

The Feedar Group is able to supply various grades of bitumen in new or used drums as well as in break-bulk or palletized,as required by its buyers.

Technical information

Technical information for penetration bitumen :

In analyzing the quality of all grades of penetration bitumen , the parameter that stands out from the rest is paraffin wax content . In laboratory testing , paraffin wax tends to crystallize at the temperature of zero degree centigrade . In cold climates ,this will result in asphalt particles becoming extremely brittle causing them to break up and the road surface to be damaged . In addition, at temperatures above 30 degrees centigrade , paraffin wax , being oily in nature , causes a marked decrease in the adhesive property of bitumen resulting in sliding of the asphalt granules on each other and producing the characteristic of waved road surface in the high tension areas of the road .

In today’s world with high prices of raw materials , it only seems logical to use the bitumen which can produce the longest lasting asphalt coating on the road surfaces and this can not be achieved unless the paraffin wax content of the bitumen is reduced to below 2 percent . In the ever lasting struggle to reach the best quality , the esfahan refinery has been able to achieve this objective and we are proud to present all grades of penetration bitumen with paraffin wax content of below 2% . Such low level of paraffin wax will considerably increasing the adhesion of asphalt granules and decreasing the chance of asphalt break up leading to the formation of a long lasting asphalt coating which will , in the long run , greatly reduce the road maintenance cost .

.

For more information please visit link below :

 Grades of Bitumen Supplied by The Feedar Group

iran bitumen price

World Exporter of pure Bitumen at best prices. We are one of the biggest and main exporters of oil products in IRAN, and we are fully equipped to export bitumen and oil products to anywhere in the world. Also,we can supply different grades of bitumen in drums and in poly bags. Bitumen or Asphalt Cement is a product derived from the crude oil refining process which is suitable for general road construction. For more information please contact us at:   [e-mail] or [e-mail]  .

Grades of Bitumen Supplied by The Feedar Group

Bitumen Grade 60/70 from Iran

Definition:

It is a kind of bitumen, which is produced during the process of oxidation of vacuum bottom (the feedstock that is derived from distillation tower in vacuum oil refineries) at bitumen production units, in a manner to set the penetration(hardness of bitumen) point between 60 to 70.

Characteristics:

.

Bitumen 60/70
Test method	Specification
D-70	1.01-1.06	Specific gravity @25/25 C
D-5	60/70	Penetration @25 C
D-36	49/56	Softening point C
D-113	100 min	Ductility @25 C
D-6	0.2 max	Loss on heating (wt) %
D-6 & D-5	20 max	Drop in penetration after heating %
D-92	250min	Flash point C
D-4	99.5 min	Solubility in CS2 (wt) %
*A.A.S.H.O.T.102	Negative	Spot test

.

.

———————————————————————————————–

Bitumen 80/100 from Iran

Definition:

It is a kind of bitumen, which is produced during the process of oxidation of vacuum bottom (the feedstock that is derived from distillation tower in vacuum oil refineries) at bitumen production units, in a manner to set the penetration(hardness of bitumen) point between  80 to 100.

Characteristics:

..

Bitumen 80/100
Test method	Specification
D-70	1.01-1.05	Specific gravity @25/25 C
D-5	80/100	Penetration @25 C
D-36	45/52	Softening point C
D-113	100 min	Ductility @25 C
D-6	0.5 max	Loss on heating (wt) %
D-6 & D-5	20 max	Drop in penetration after heating %
D-92	232 max	Flash point C
D-4	99.5 min	Solubility in CS2 (wt) %
D-4	0.2 max	Organic matter insoluble in CS2 (wt) %
*A.A.S.H.O.T.102	Negative	Spot test
D-92	232min	Flash Point C
	232min

.

———————————————————————————————–

Bitumen40/50  from Iran 

Definition:

It is a kind of bitumen, which is produced during the process of oxidation of vacuum bottom (the feedstock that is derived from distillation tower in vacuum oil refineries) at bitumen production units, in a manner to set the penetration(hardness of bitumen) point between 40 to 50.

Characteristics:

.

Bitumen 40/50
	Specification	Test method
Specific gravity @25/25 C	1.01-1.06	D-70
Penetration @25 C	40/50	D-5
Softening point C	52/60	D-36
Ductility @25 C	100 min	D-113
Loss on heating (wt) %	0.2 max	D-6
Drop in penetration after heating %	20 max	D-6 & D-5
Flash point C	250min	D-92
Solubility in CS2 (wt) %	99.5 min	D-4
Spot test	Negative	*A.A.S.H.O.T.102

Our products

Our products are different  types of bitumen such as  grade 60/70 , 80/100, 40/50 and  30/40.

Packing is also available based on your  choice of drums  such as  drums of 98 cm in height with 180 +\- 3 kg net capacity made from new steel iron sheets known as standard drums and for land destinations, thicker drums of 1 mm body thickness with 220 kg capacity are also available.

Other types of packing is also available such as bitumen in poly bags of 30 kg  which can normally fit around  700 bags per 20′ dry container and are meltable in bitumen melting machines.